BCP / PCP Stock in Venezuela
Progressing cavity pumps
- Flow rate
- 100 to 700 BPD at 100 rpm
- Lift
- up to 6,000 ft in the reference series
- Elastomers
- NBR, HNBR and others to suit the fluid
- Accessories
- stop nipples and torque anchors
Artificial lift
Downhole and surface equipment, spares and accessories for PCP, ESP and beam pumping systems, selected for your well conditions.
Walk through the system
Tap or hover over a component to find it in the well.
PCP: pump, rod string and surface
A complete line with stock in Venezuela for viscous crude and fluids with sand or gas.
PCP surface Stock in Venezuela
Drive heads
- Power
- 100 HP single and 150 HP dual (2 × 75 HP)
- Connection
- 4-1/16" 3.000 psi (R-37)
- Design
- hollow shaft, backspin brake and seal box
- Spares
- belts, sheaves, seals and clamps
API 11B Stock in Venezuela
Sucker rods and string accessories
- Sizes
- 1-1/8" × 30 ft and 1-1/4" × 25 ft with 1-1/8" pin
- Material
- grade D (Cr-Mo, AISI 4138/M); 4130, 4142 and 4330 steels on request
- Couplings
- class T or SM (spray metal)
- Accessories
- pony rods, centralizers, crossovers and nipples; continuous rod on request
Surface Stock in Venezuela
Polished rod
- Diameters
- 1-1/4" y 1-1/2"
- Accessories
- clamps, stuffing boxes and packing
- Use
- PCP drive heads and pumping units
ESP: electric submersible pumping
Pumps, downhole motors, protectors, intakes, gas separators and sensors to suit the configuration, with drive, transformer and junction box at surface.
- Series
- 400 and 500 as supply references
- Surface
- drive, transformer and junction box
- Cable
- flat AWG 1 and AWG 2, 5 kV
- Selection
- by flow rate, head and depth
ESP power cable
High-temperature flat cable with a lead barrier, for wells with H₂S, CO₂ and risk of insulation decompression. Single or double capillary options for chemical injection.
- Configuration
- flat, AWG 1 and AWG 2
- Rated voltage
- 5 kV
- Temperature
- up to 450 °F (232 °C)
- Insulation
- oil-resistant EPDM
- Armor
- galvanized, stainless or Monel
- Dimensions
- AWG 1: 16.65 × 44.15 mm · AWG 2: 15.85 × 41.75 mm
Drives, motors and transformers
Drive, control and power supply for the well, quoted separately or as one package.
VFD / VSD
Variable frequency drives
- Ratings
- 40, 125 y 150 HP
- Supply
- 480 V, three-phase, 60 Hz; 6-pulse with line reactor
- Enclosure
- NEMA 3R (IP55), 7" touch HMI
- Communication
- Modbus RTU y Ethernet TCP/IP
- Controller
- for PCP or beam pumping
TEFC
Electric motors
- Type
- TEFC, premium efficiency
- Use
- PCP drive heads and beam pumping
- Power
- to suit the drive head (75 to 100 HP)
Power
Transformers
- Type
- power and distribution
- Capacity
- kVA and voltages to suit the site
- Accessories
- panels, protection and cable
Integrated package
Drive, transformer, motor, drive head and downhole equipment in a single offer, with documentation and startup coordinated with each manufacturer.
Beam pumping
Surface and downhole components for beam pumping units.
- Downhole
- subsurface pumps, rods and accessories
- Surface
- polished rods, clamps and stuffing boxes
- Control
- drives with a beam pump controller
Rod string and well control
Rod string components, wellheads and pressure control equipment for production and intervention, by pressure, dimensions and service.
API 6A · API 16A by model
Production BOP
- Working pressure
- 3,000 psi in the reference configuration
- Integral BOP
- with pumping tee: 11" lower and 5-1/8" upper flange, 4" × 2" LP outlets
- Polished rod
- BOP with clamp and packing for PCP systems
Wellheads and pressure control
- Casing and tubing heads, spools, adapters and API 6A flanges
- Production trees and wellhead valves, with material class to suit the service
- Adjustable and fixed chokes; test and choke manifolds
- Assemblies matched to the required pressure, dimensions and connection
Intervention, completion and drilling
Equipment, tools and spares for coiled tubing, wireline, completion and drilling, to your work program and specification. Installation or startup is coordinated with manufacturers or specialists and quoted separately.
Well data to quote a system
With this information we select pump, elastomer, drive head and power. If some data is missing, we can still start.
Request a quote- Pump setting depth
- Casing and tubing size and weight
- Target flow rate (BPD)
- Water cut and API gravity
- Crude viscosity
- Gas-oil ratio
- Bottomhole and wellhead pressure
- Bottomhole temperature
- Sand content
- H₂S and CO₂ content
- Well deviation
- Available power: voltage and frequency
Sizes, standards and configurations on this page are supply references. Availability, final specification, lead time and delivery scope are confirmed in each quotation, which identifies the manufacturer, configuration and documentation. H&B Global Services does not manufacture the products described; we supply them through manufacturers, representatives and distributors.
Send us your requirement
Share your materials list, datasheet or part reference. We reply with availability, lead time and delivery options.
To get a faster quote, include
- SpecificationStandard, material, size or reference
- QuantityWith its unit of measure
- DateRequired at destination
- DestinationPort, warehouse or location
- DocumentationCertificates or inspection